Concrete driveway guides, calculator & specs
2026 cost breakdowns, EN 206 C35/45 XF4 mix specifications, contraction joint rules, drainage guides and interactive concrete estimator.
Pick a guide below or use the homepage calculator to price your driveway before requesting a written quote from one concrete driveway contractor covering your county.
Free, no obligation. One local specialist covering your area replies, not five.
- €75 to €105/m²brushed or tamped C35/45 concrete driveway (€3,800–€5,500 for 50 m²)
- €95 to €140/m²exposed aggregate pebble-wash (€95–€135) & pattern-imprinted (€100–€140)
- C35/45 XF4 MixEN 206 freeze-thaw concrete with 4.5%–5.5% air entrainment, never weak C20/25
- 100mm to 150mmreinforced slab over 150mm compacted Clause 804 stone & saw-cut joints
All concrete driveway cost & specification guides
Get a concrete driveway quote for your home
Pick your concrete finish, current ground condition and county. Your request goes to one concrete driveway contractor covering your county, who checks levels, drainage and access on site and prices the job in writing.
Concrete driveway cost, mix & drainage guides
Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & concrete glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site
Key questions from our guides
How much does a concrete driveway cost in Ireland in 2026?
In 2026, a poured brushed or tamped concrete driveway in Ireland costs €75 to €105 per m² supplied and laid (including 13.5% VAT, 250mm dig-out, 150mm compacted Clause 804 stone sub-base, shuttering, A142 mesh or polypropylene fibres, EN 206 C35/45 XF4 concrete and saw-cut contraction joints), putting a standard 50 m² two-car driveway at €3,800 to €5,500. Floated or honed architectural concrete costs €90 to €130/m², exposed aggregate pebble-wash costs €95 to €135/m², and pattern-imprinted sealed concrete costs €100 to €140/m². Breaking out an existing cracked concrete or tarmac driveway adds €18 to €30/m² for breaker hire and grab-lorry disposal.
What grade of ready-mix concrete should be used for an Irish driveway?
Always specify IS EN 206 strength class C35/45 with freeze-thaw exposure class XF3 or XF4 and 4.5% to 5.5% entrained micro-air bubbles, maximum water-cement ratio 0.45 to 0.50, and minimum cement content 340 kg/m³. Never allow indoor footing concrete (C20/25 or C25/30 without air entrainment) on an exterior Irish driveway: rainwater and winter road salt carried off tyres expand inside non-air-entrained pores when they freeze, peeling the top 5mm off the slab within two winters.
How thick should a concrete driveway slab be, and does it need steel mesh?
For passenger cars and SUVs on a well-compacted 150mm Clause 804 sub-base, pour a 100mm to 125mm slab reinforced with A142 steel fabric mesh (supported on 40mm–50mm plastic spacer chairs in the upper-middle third of the slab) plus polypropylene micro-fibres against early plastic shrinkage. Where heating-oil tankers, delivery vans, horseboxes or agricultural tractors cross the entrance, step up to a 150mm slab reinforced with A193 or A252 steel mesh.
Why and when must contraction joints be saw-cut in a concrete driveway?
Concrete shrinks by roughly 0.5mm per metre as it hydrates and cools. Saw-cutting straight 3mm–4mm relief grooves to one-quarter of the slab thickness (25mm–32mm deep on a 100–125mm slab) every 3.5m to 4m in both directions guides that natural shrinkage into neat, straight lines instead of jagged random cracks. Cuts should be made within 6 to 18 hours of pouring (typically the morning after the pour) as soon as the surface resists ravelling under the diamond blade.
Do I need planning permission or special drainage for a concrete driveway in Ireland?
Under Class 6, Schedule 2, Part 1 of the Irish Planning and Development Regulations, paving a front or side garden for domestic parking is generally exempted development provided surface rainwater does not discharge onto the public footpath or road and is intercepted on your own property via permeable borders or a linear ACO threshold channel piped to a garden soakaway. You DO need planning permission if you are creating a brand-new vehicular entrance or widening an existing gateway pillar opening onto a public road, plus a council road-opening licence to dish the public kerb.
How soon can you walk and park cars on a new concrete driveway?
In typical Irish temperatures (10°C to 18°C), you can walk carefully on a freshly poured C35/45 driveway the day after pouring, park standard passenger cars after 7 days (when C35/45 reaches roughly 65% to 70% of its 28-day compressive strength), and allow heavy oil lorries, skips or campervans onto the slab after 21 to 28 days.
Concrete driveway contractors across all 26 counties
Enquiries from all 26 counties go to one concrete driveway contractor covering your county, from Dublin, Cork, Galway and Limerick to Kildare, Meath, Wicklow, Wexford, Kerry and Donegal. Pick your county for local 2026 prices, CSO housing data, Met Éireann rainfall and frost-mix notes. Compare all areas covered →
Ready for an on-site measure, level check and written quote?
One concrete driveway contractor covering your county checks dig-out depth, falls and ACO drainage on site and quotes in writing.