Concrete driveways poured & finished across Ireland
Brushed and tamped concrete driveways (€75–€105/m², €3,800–€5,500 for 50 m²), exposed aggregate pebble-wash (€95–€135/m²), pattern-imprinted concrete (€100–€140/m²) and heavy 150mm entrances poured in freeze-thaw EN 206 C35/45 XF4 concrete across Dublin, Cork, Galway, Kildare, Meath, Limerick and all 26 counties.
Free site check, no obligation. One concrete driveway contractor covering your county rings you, not five.
- €75 to €105/m²brushed or tamped C35/45 concrete driveway (€3,800–€5,500 for 50 m²)
- €95 to €140/m²exposed aggregate pebble-wash (€95–€135) & pattern-imprinted (€100–€140)
- C35/45 XF4 MixEN 206 freeze-thaw concrete with 4.5%–5.5% air entrainment, never weak C20/25
- 100mm to 150mmreinforced slab over 150mm compacted Clause 804 stone & saw-cut joints
Groundworks, Steel Mesh & Finished Concrete: What Goes Into a Proper Slab
From excavated Clause 804 sub-base and chaired steel reinforcement to screeded C35/45 pours, pebble-wash textures and kerbed entrances.






Choose your concrete driveway finish & slab specification
Every finish below is poured as a monolithic reinforced C35/45 exterior slab over roller-compacted Clause 804 stone, with zero sunken wheel ruts and zero weeds between blocks.
Brushed & Tamped Concrete€75–€105/m² · €3,800–€5,500 for 50 m² · slip-resistant C35/45
Exposed Aggregate Pebble-Wash€95–€135/m² · washed Irish quartz, granite & flint texture
Pattern-Imprinted Concrete€100–€140/m² · colour-hardened cobble & ashlar slate stamps
150mm Heavy & Rural Entrances€90–€125/m² · A193 steel mesh for vans, oil tankers & yards
Old Driveway Breakout & Pour+€18–€30/m² breaker & grab lorry · cracked tarmac or concrete
Floated Architectural Concrete€90–€130/m² · crisp saw-cut bays & silver granite bordersFive site checks that stop a concrete driveway spalling or cracking
Nearly every failed concrete driveway in Ireland comes down to indoor-grade concrete, skipped air entrainment or late saw cuts. Check these five details on every written quote.
| Specification item | Passenger car drive (100–125mm) | Heavy / oil-tanker entrance (150mm) | What fails if cut |
|---|---|---|---|
| Ready-mix grade (EN 206) | C35/45 XF3 or XF4, w/c ≤ 0.45 | C35/45 XF4, min. 340–360 kg/m³ cement | Indoor C20/25 peels & spalls after frost + road salt |
| Air entrainment | 4.5%–5.5% microscopic air voids | 4.5%–5.5% air entrainment | Freeze-thaw water expansion pops top mortar layer |
| Granular sub-base | 150mm compacted TII Clause 804 | 200mm Clause 804 + geotextile on clay | Soft clay pumps upward; corner slabs snap under tyres |
| Reinforcement | A142 steel mesh on chairs + PP fibres | A193 / A252 steel mesh on 50mm chairs | Mesh laid flat on stone does zero structural work |
| Contraction joints | 3.5m–4m bays cut 25–32mm deep (6–18 hrs) | 3.5m–4m bays cut 38–40mm deep (6–18 hrs) | Late or shallow cuts cause diagonal shrinkage cracks |
| Surface fall & drainage | 1:60–1:80 fall to B125 ACO channel | 1:60 fall to C250 ductile-iron channel | Standing puddles & breach of Class 6 footpath rule |
2026 Irish concrete driveway cost by size & finish (incl. 13.5% VAT)
Rates below cover dig-out of grass/soil or gravel, 150mm compacted Clause 804 sub-base, shuttering, reinforcement, EN 206 C35/45 XF4 ready-mix pour, finishing and saw-cut contraction joints. Add €18 to €30/m² where an existing concrete or tarmac slab has to be broken out and removed by grab lorry, and €380 to €750 for a linear ACO threshold drain piped to an existing gully or new soakaway.
| Driveway size | Brushed / tamped | Floated / honed | Exposed aggregate | Pattern-imprinted |
|---|---|---|---|---|
| 30 m² (single town drive) | €2,500–€3,550 | €2,900–€4,200 | €3,100–€4,350 | €3,250–€4,550 |
| 50 m² (2-car semi-D drive) | €3,800–€5,500 | €4,500–€6,500 | €4,750–€6,750 | €5,000–€7,000 |
| 80 m² (3-car detached drive) | €5,800–€8,350 | €6,850–€9,900 | €7,200–€10,250 | €7,600–€10,650 |
| 130 m² (rural sweep / apron) | €9,000–€13,000 | €10,650–€15,400 | €11,250–€15,950 | €11,850–€16,550 |
Calculate your concrete driveway cost, m³ volume & joint bays
Pick your driveway area, surface finish and ground/slab duty to estimate 2026 turnkey cost (incl. 13.5% VAT), ready-mix C35/45 volume, Clause 804 stone and saw-cut bays.
Estimated guide price (incl. 13.5% VAT)
€3,800 to €5,500
50 m² · Brushed C35/45 XF4 concrete · 6.7 m³ ready-mix (1 truck load)
Includes ~26t dig-out, ~17t compacted Clause 804 stone, 125mm slab + A142 mesh & PP micro-fibres, 4 saw-cut contraction bays (3.5m–4m grid) and 13.5% VAT.
Send these specs to quote formHow this is worked out
Conservative 2026 turnkey estimate (not a binding quote) based on 250–300mm excavation, 150mm roller-compacted Clause 804 stone (2.2 t/m³), EN 206 C35/45 XF4 air-entrained ready-mix concrete (+7% sub-base tolerance, max 7.5 m³ per standard 8-wheel drum lorry), saw-cut joints on a 3.5m–4m grid and 13.5% VAT. Narrow side-access barrow runs, concrete boom pumps (€450–€750) or extra ACO soakaways are priced on site.
Get a concrete driveway quote for your home
Pick your concrete finish, current ground condition and county. Your request goes to one concrete driveway contractor covering your county, who checks levels, drainage and access on site and prices the job in writing.
Concrete driveway cost, mix & drainage guides
Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & concrete glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site
Questions homeowners ask before pouring a concrete driveway
How much does a concrete driveway cost in Ireland in 2026?
In 2026, a poured brushed or tamped concrete driveway in Ireland costs €75 to €105 per m² supplied and laid (including 13.5% VAT, 250mm dig-out, 150mm compacted Clause 804 stone sub-base, shuttering, A142 mesh or polypropylene fibres, EN 206 C35/45 XF4 concrete and saw-cut contraction joints), putting a standard 50 m² two-car driveway at €3,800 to €5,500. Floated or honed architectural concrete costs €90 to €130/m², exposed aggregate pebble-wash costs €95 to €135/m², and pattern-imprinted sealed concrete costs €100 to €140/m². Breaking out an existing cracked concrete or tarmac driveway adds €18 to €30/m² for breaker hire and grab-lorry disposal.
What grade of ready-mix concrete should be used for an Irish driveway?
Always specify IS EN 206 strength class C35/45 with freeze-thaw exposure class XF3 or XF4 and 4.5% to 5.5% entrained micro-air bubbles, maximum water-cement ratio 0.45 to 0.50, and minimum cement content 340 kg/m³. Never allow indoor footing concrete (C20/25 or C25/30 without air entrainment) on an exterior Irish driveway: rainwater and winter road salt carried off tyres expand inside non-air-entrained pores when they freeze, peeling the top 5mm off the slab within two winters.
How thick should a concrete driveway slab be, and does it need steel mesh?
For passenger cars and SUVs on a well-compacted 150mm Clause 804 sub-base, pour a 100mm to 125mm slab reinforced with A142 steel fabric mesh (supported on 40mm–50mm plastic spacer chairs in the upper-middle third of the slab) plus polypropylene micro-fibres against early plastic shrinkage. Where heating-oil tankers, delivery vans, horseboxes or agricultural tractors cross the entrance, step up to a 150mm slab reinforced with A193 or A252 steel mesh.
Why and when must contraction joints be saw-cut in a concrete driveway?
Concrete shrinks by roughly 0.5mm per metre as it hydrates and cools. Saw-cutting straight 3mm–4mm relief grooves to one-quarter of the slab thickness (25mm–32mm deep on a 100–125mm slab) every 3.5m to 4m in both directions guides that natural shrinkage into neat, straight lines instead of jagged random cracks. Cuts should be made within 6 to 18 hours of pouring (typically the morning after the pour) as soon as the surface resists ravelling under the diamond blade.
Do I need planning permission or special drainage for a concrete driveway in Ireland?
Under Class 6, Schedule 2, Part 1 of the Irish Planning and Development Regulations, paving a front or side garden for domestic parking is generally exempted development provided surface rainwater does not discharge onto the public footpath or road and is intercepted on your own property via permeable borders or a linear ACO threshold channel piped to a garden soakaway. You DO need planning permission if you are creating a brand-new vehicular entrance or widening an existing gateway pillar opening onto a public road, plus a council road-opening licence to dish the public kerb.
How soon can you walk and park cars on a new concrete driveway?
In typical Irish temperatures (10°C to 18°C), you can walk carefully on a freshly poured C35/45 driveway the day after pouring, park standard passenger cars after 7 days (when C35/45 reaches roughly 65% to 70% of its 28-day compressive strength), and allow heavy oil lorries, skips or campervans onto the slab after 21 to 28 days.
What VAT rate applies to concrete driveway installations in Ireland?
13.5%. Under Irish Revenue's two-thirds rule for construction services on residential property, when one concrete contractor supplies the Clause 804 stone, mesh and ready-mix concrete and carries out the groundworks and pour as a single contract (where materials stay below two-thirds of the price), the entire invoice carries the 13.5% VAT rate rather than 23% supply-only VAT.
Concrete driveway contractors across all 26 counties
Enquiries from all 26 counties go to one concrete driveway contractor covering your county, from Dublin, Cork, Galway and Limerick to Kildare, Meath, Wicklow, Wexford, Kerry and Donegal. Pick your county for local 2026 prices, CSO housing data, Met Éireann rainfall and frost-mix notes. Compare all areas covered →
Ready for an on-site measure, level check and written quote?
One concrete driveway contractor covering your county checks dig-out depth, falls and ACO drainage on site and quotes in writing.