Concrete driveway glossary of terms & specs
Understand every ready-mix grade, steel mesh code, sub-base layer and drainage term on your written driveway quotation.
Free, no obligation. One local specialist covering your area replies, not five.
- €75 to €105/m²brushed or tamped C35/45 concrete driveway (€3,800–€5,500 for 50 m²)
- €95 to €140/m²exposed aggregate pebble-wash (€95–€135) & pattern-imprinted (€100–€140)
- C35/45 XF4 MixEN 206 freeze-thaw concrete with 4.5%–5.5% air entrainment, never weak C20/25
- 100mm to 150mmreinforced slab over 150mm compacted Clause 804 stone & saw-cut joints
15 concrete terms explained in plain English
- EN 206 C35/45 Concrete
Structural ready-mix concrete delivering 35 N/mm² cylinder strength and 45 N/mm² cube strength at 28 days, specified for durable exterior Irish residential driveways and rural entrances.
- XF3 / XF4 Freeze-Thaw Exposure Class
IS EN 206 durability classes for horizontal outdoor slabs saturated by rain and exposed to freezing (XF3) or freezing plus road de-icing salts and coastal sea spray (XF4).
- Air Entrainment (4.5%–5.5%)
A factory-dosed admixture creating billions of microscopic air bubbles per cubic metre so freezing pore water can expand safely without flaking or spalling the driveway surface.
- TII Clause 804 Sub-Base
Graded crushed rock (0–31.5mm stone and fines) laid in 150mm–200mm thickness and compacted with a vibrating roller or heavy plate compactor to form a frost-free load-bearing base.
- A142, A193 & A252 Steel Fabric Mesh
BS 4483 welded high-tensile steel wire sheets (6mm, 7mm and 8mm bars on a 200mm × 200mm grid) placed on spacer chairs inside the concrete to hold any hairline cracks tightly closed.
- Mesh Spacer Chairs (40mm–50mm)
Moulded plastic or concrete supports placed on the sub-base before pouring so reinforcing mesh sits inside the upper-middle zone of the slab with proper cover.
- Polypropylene Micro-Fibres
Fine synthetic fibres (typically 12–18mm long at 0.6–0.9 kg/m³) mixed into the truck drum to hold fresh concrete together against early wind/sun plastic shrinkage crazing.
- Saw-Cut Contraction Joint
A straight 3mm–4mm groove cut to one-quarter of the slab depth on a 3.5m–4m grid within 6 to 18 hours of pouring so drying shrinkage occurs neatly down a straight line.
- Isolation / Expansion Joint
A full-depth 10mm–12mm closed-cell compressible foam strip separating the concrete driveway from house walls, gate piers, manhole collars and public footpaths.
- Surface Retarder (Exposed Aggregate)
A water-based liquid sprayed onto freshly floated concrete to pause setting in the top 2–3mm of cement paste so pebbles can be washed clean several hours later.
- Dry-Shake Colour Hardener
Pigmented quartz-cement powder broadcast and trowelled into the top 3–4mm of pattern-imprinted concrete for fade-free colour and high tyre abrasion resistance.
- Curing Compound (Resin / Wax Membrane)
A spray-applied film applied right after brushing or floating to lock moisture inside the slab during its first 7 days of hydration, boosting surface hardness.
- EN 1433 Class B125 & C250 Channels
Load ratings for linear ACO threshold drainage grates: B125 (12.5 tonnes) suits domestic cars; C250 (25 tonnes) suits vans, delivery lorries and heating-oil tankers.
- Class 6 Exempted Development
Irish Planning and Development Regulations provision allowing domestic garden parking hardstanding without planning permission provided surface water is absorbed on-site.
- Revenue Two-Thirds VAT Rule (13.5%)
Irish tax rule under which combined supply-and-pour residential driveway contracts attract 13.5% construction VAT when materials cost less than two-thirds of the job total.
Get a concrete driveway quote for your home
Pick your concrete finish, current ground condition and county. Your request goes to one concrete driveway contractor covering your county, who checks levels, drainage and access on site and prices the job in writing.
Concrete driveway cost, mix & drainage guides
Straight answers to what homeowners ask most: itemised 2026 costs, material specifications, drainage & planning rules, and what to check before you book.
More guides & resources: All guides & calculator hub · Technical & concrete glossary · Frequently asked questions · All areas covered · Editorial standards · Contact · About this site
Specification questions
How much does a concrete driveway cost in Ireland in 2026?
In 2026, a poured brushed or tamped concrete driveway in Ireland costs €75 to €105 per m² supplied and laid (including 13.5% VAT, 250mm dig-out, 150mm compacted Clause 804 stone sub-base, shuttering, A142 mesh or polypropylene fibres, EN 206 C35/45 XF4 concrete and saw-cut contraction joints), putting a standard 50 m² two-car driveway at €3,800 to €5,500. Floated or honed architectural concrete costs €90 to €130/m², exposed aggregate pebble-wash costs €95 to €135/m², and pattern-imprinted sealed concrete costs €100 to €140/m². Breaking out an existing cracked concrete or tarmac driveway adds €18 to €30/m² for breaker hire and grab-lorry disposal.
What grade of ready-mix concrete should be used for an Irish driveway?
Always specify IS EN 206 strength class C35/45 with freeze-thaw exposure class XF3 or XF4 and 4.5% to 5.5% entrained micro-air bubbles, maximum water-cement ratio 0.45 to 0.50, and minimum cement content 340 kg/m³. Never allow indoor footing concrete (C20/25 or C25/30 without air entrainment) on an exterior Irish driveway: rainwater and winter road salt carried off tyres expand inside non-air-entrained pores when they freeze, peeling the top 5mm off the slab within two winters.
How thick should a concrete driveway slab be, and does it need steel mesh?
For passenger cars and SUVs on a well-compacted 150mm Clause 804 sub-base, pour a 100mm to 125mm slab reinforced with A142 steel fabric mesh (supported on 40mm–50mm plastic spacer chairs in the upper-middle third of the slab) plus polypropylene micro-fibres against early plastic shrinkage. Where heating-oil tankers, delivery vans, horseboxes or agricultural tractors cross the entrance, step up to a 150mm slab reinforced with A193 or A252 steel mesh.
Why and when must contraction joints be saw-cut in a concrete driveway?
Concrete shrinks by roughly 0.5mm per metre as it hydrates and cools. Saw-cutting straight 3mm–4mm relief grooves to one-quarter of the slab thickness (25mm–32mm deep on a 100–125mm slab) every 3.5m to 4m in both directions guides that natural shrinkage into neat, straight lines instead of jagged random cracks. Cuts should be made within 6 to 18 hours of pouring (typically the morning after the pour) as soon as the surface resists ravelling under the diamond blade.
Concrete driveway contractors across all 26 counties
Enquiries from all 26 counties go to one concrete driveway contractor covering your county, from Dublin, Cork, Galway and Limerick to Kildare, Meath, Wicklow, Wexford, Kerry and Donegal. Pick your county for local 2026 prices, CSO housing data, Met Éireann rainfall and frost-mix notes. Compare all areas covered →
Ready for an on-site measure, level check and written quote?
One concrete driveway contractor covering your county checks dig-out depth, falls and ACO drainage on site and quotes in writing.